跪求哪位大哥能共享一下国行system/etc下gps.conf文件
最好是百度云，感激不尽啊！ #moto gps_xtra3.conf#Uncommenting these urls would only enable
#the power up auto injection and force injection(test case).
XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra3grc.bin
XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra3grc.bin
XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra3grc.bin
# Error Estimate
# _SET = 1
# _CLEAR = 0
ERR_ESTIMATE=0
#Test
#NTP_SERVER=time.gpsonextra.net
#Asia
# NTP_SERVER=asia.pool.ntp.org
#Europe
# NTP_SERVER=europe.pool.ntp.org
#North America
NTP_SERVER=north-america.pool.ntp.org
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
# 4 - Debug, 5 - Verbose
# If DEBUG_LEVEL is commented, Android's logging levels will be used
DEBUG_LEVEL = 2
# Intermediate position report, 1=enable, 0=disable
INTERMEDIATE_POS=0
# supl version 2.0
SUPL_VER=0x20000
# Emergency SUPL, 1=enable, 0=disable
SUPL_ES=0
# SUPL Mode (0=Standalone, 1=MSB, 2=MSA)
SUPL_MODE=0
# GPS Capabilities bit mask
# SCHEDULING = 0x01
# MSB = 0x02
# MSA = 0x04
# ON_DEMAND_TIME = 0x10
# GEOFENCE = 0x20
# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
CAPABILITIES=0x37
# Accuracy threshold for intermediate positions
# less accurate positions are ignored, 0 for passing all positions
# ACCURACY_THRES=5000
################################
##### AGPS server settings #####
################################
# FOR SUPL SUPPORT, set the following
SUPL_HOST=supl.google.com
SUPL_PORT=7276
# FOR C2K PDE SUPPORT, set the following
# C2K_HOST=c2k.pde.com or IP
# C2K_PORT=1234
####################################
#LTE Positioning Profile Settings
####################################
# 0: Enable RRLP on LTE(Default)
# 1: Enable LPP_User_Plane on LTE
# 2: Enable LPP_Control_Plane
# 3: Enable both LPP_User_Plane and LPP_Control_Plane
LPP_PROFILE = 0
################################
# EXTRA SETTINGS
################################
# NMEA provider (1=Modem Processor, 0=Application Processor)
NMEA_PROVIDER=0
# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
SGLTE_TARGET=0
##################################################
# Select Positioning Protocol on A-GLONASS system
##################################################
# 0x1: RRC CPlane
# 0x2: RRLP UPlane
# 0x4: LLP Uplane
A_GLONASS_POS_PROTOCOL_SELECT = 0
notepad++ 新建一个空文件。将这个复制进去。保存为gps.conf即可。 尘封之泪 发表于 2015-4-30 21:36
notepad++ 新建一个空文件。将这个复制进去。保存为gps.conf即可。
能不能发一个moto360增加中文选项编译好的文件啊，看了你的帖子，实在搞不定{:soso_e101:}
拿去吧 hanjiechao 发表于 2015-4-30 21:45
能不能发一个moto360增加中文选项编译好的文件啊，看了你的帖子，实在搞不定
提供下 ClockworkSetup.apk和ClockworkSetup.odex 因为没有360，只能帮你试试
尘封之泪 发表于 2015-4-30 21:36
notepad++ 新建一个空文件。将这个复制进去。保存为gps.conf即可。
太复杂了啊~我刷了永泽的ROM现在不能搜星啊好郁闷，求方法，替换楼下的gps文件，开机显示系统更新也不能搜星~~~~
新锐锋芒 发表于 2015-4-30 21:52
拿去吧
我刷了永泽的ROM现在不能搜星啊好郁，替换了你的gps文件，开机显示系统更新还是不能搜星~~~~不知什么原...
兄弟 你定位问题解决了吗 新锐锋芒 发表于 2015-4-30 21:52
拿去吧
感谢分享 。{:soso_e165:}
页:
[1]