VZW5.1未解BLRoot教程（v版1060 Root)
本帖最后由 caosumin 于 2015-10-4 20:35 编辑本root教程适用于5.1未解锁BL的MOTO XT1060
IMPORTANT!!!
I'M NOT RESPONSIBLE FOR ANY DAMAGE THIS METHOD CAN CAUSE TO YOUR DEVICE!! (though it shouldn't...)
说在开始之前！！！
本人不对任何机器损坏负责比如说什么炸个电子元件啊，瞎个摄像头啊，碎个屏幕啊什么的。（然而，我早已看穿一切，这些不会发生的）
What's included in this patch:
1. Root
2. Xposed framework
3. Busybox
4. Added "Double chop for flashlight" gesture from Moto X 2014
5. No system write yet
整完这些你可以：
完成ROOT，然而并不能改写SYS分区。很遗憾。
Xposed可用
Busybox可用
What's needed:前戏：
1. Moto drivers驱动-论坛搜索
2b. VZW: Moto X VZW XT1060, build version LPA23.12-39.7, flashed using this rom using RSDLite. It will not work on OTA!http://imgstore01.cdn.sogou.com/app/a/100520032/e101重刷底包，OTA据说不行，需重新用RSD刷写，底包论坛搜索
3.Python 2.7见附件1
4. Pyserial见附件1
5.QHSUSB_DLOAD drivers见附件1
6. VZW: Root patch from here (you also can use extreme slim version, for more info view "Slim Root patch" and "Extreme Slim Root patch" part at the end of this post)Root包刷入，精简版本附件2，原版附件3。
7. Xposed Framework installation file
8. Ability to install drivers manually (Instruction)会手动安装驱动。。http://imgstore01.cdn.sogou.com/app/a/100520032/e101我想大家都会。
9. Fully charged device充足的电量，这个不需要重申了吧
10. Ability not to panic when device goes black 刷死了能承受。。。。。。http://imgstore01.cdn.sogou.com/app/a/100520032/e146
Instructions:插入（root过程）
1. Install Moto drivers安装驱动
2a. ATT: Flash your device with LPA23.12-21.1
2b. VZW: Flash your device with LPA23.12-39.7用RSD刷写底包
3. Install python 安装Python
4. Install pyserial安装pyserial
5. Unpack root patch to python folder (default: C:\Python27)将对应的root专用包放到Python的根目录
6. Reboot to fastboot.手机关机后进入fastboot模式
7. Run BLBROKE.bat from python folder. (device will turn off and go black, bud you will see ned QHSUSB_DLOAD device in device manager, no panic!)打开Python文件夹，启动BLBROKE.bat（注意：系统将关机进入黑屏状态，这时候你需要手动安装QHSUSBhttp://imgstore01.cdn.sogou.com/app/a/100520032/e151SB 驱动，在我的电脑-设备管理器）
8. Install QHSUSB_DLOAD driver manually. In case of Windows 7 - there will be a warning about drivers not being digitally sign, continue anyway. Incase of Windows 8 or higher you need to follow this manual first, and then do the same as in case of Windows 7.手动安装SB驱动，Win7会有一个数字签名的警示提示，但是管他那么多呢？继续就是，至于Win8 ，建议你换个电脑或者系统。
9. Run RUN_Root.bat from python folder. This step will take from 15 to 20 minutes, after it's done phone will reboot and start optimizing apps. Let it finish.运行Run_root.bat..坐等即可。
10. After boot is complete, install Xposed Framework installation file.（此步为装载Xposed。）
11. Double chop gesture is configured in Moto app.（增加功能，摇两下开启手电筒？？）有个卵用。
12. Be happy with your rooted system with Xposed and Busybox!去和你r被剥掉衣服的情人疯狂策马奔腾吧。。。。
附件1：
本帖隐藏的内容链接：http://pan.baidu.com/s/1i3iz12l
密码：zp3j
附件2：
本帖隐藏的内容链接：http://pan.baidu.com/s/1ntOoF0l
密码：45jh
附件3：
本帖隐藏的内容链接：http://pan.baidu.com/s/1sjpAEE5
密码：fbam
All credits for this method go to CrashXXL, and also big thanks to s5610 for providing rooted image.感谢那两个上仙（自从花千骨后，前辈要称上仙，领导要叫尊上）
ASD DDDDDDDDDD 没人顶非要回复可见吗？ mark！！！ exitexitexitexitexitexit 顶一个，再顶一个 那个版本的？ 赞 mark~~ 这个思路是不是也可以用来救砖？
页:
[1]
2