v1060 升级5.1 root 黑砖！！！！！求教大神！！！
本帖最后由 junyujian 于 2015-11-24 12:36 编辑大神我的流程：
1.v1060没解BL 4.4.4不升级BL 升5.1，
2.进入系统后，按照http://bbs.ihei5.com/thread-347032-1-1.html 这个root无精简版，
3.忘记进入“禁用系统强制驱动签名”，但是驱动安装上了，开始root.bat。
4.黑砖一直黑，
5.按照http://bbs.ihei5.com/thread-303178-1-2.html 救砖显示如下
C:\Users\leo\Downloads\blankflash>qflash.exe -com3 -ramload MPRG8960.hex -mbn 33
MSM8960_bootloader_singleimage.bin -v -o
Motorola qflash Utility version 1.3
COMPORT :COM3
RAMLOADER :MPRG8960.hex
type is 0x21
7 mbn file name MSM8960_bootloader_singleimage.bin type 33
verbose mode on
Motorola qflash dll version 1.6
RAMLOADER VERSION: PBL_DloadVER2.0
------------------------------------------------------
DEVICE INFORMATION:
------------------------------------------------------
Version : 0x8
Min Version : 0x1
Max Write Size: 0x600
Model : 0x90
Device Size : 0
Description : Intel 28F400BX-TL or Intel 28F400BV-TL
------------------------------------------------------
Using passed in packet size, changing from 0x600 -> 0x600
EXTENDED_LINEAR_ADDRESS_REC @ 0x2a000000
Write 65536 bytes @ 0x2a000000
100EXTENDED_LINEAR_ADDRESS_REC @ 0x2a010000
Write 11840 bytes @ 0x2a010000
100START_LINEAR_ADDRESS_REC @ 0x2a000000
EOF_REC
Sleeping for 3s
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
Still no data, giving up!
sdl_hello() - Failed to receive ACK
sdl_hello() - Invalid response: 7e030003331b7e
sdl_hello() - This is a NAK response from ROM code, which means the device has b
een reset back to blank flash mode. Usually this is caused by power supply issue
s. Please try again with battery eliminator if it persists
RAMLOADER VERSION: PBL_DloadVER2.0
------------------------------------------------------
DEVICE INFORMATION:
------------------------------------------------------
Version : 0x8
Min Version : 0x1
Max Write Size: 0x600
Model : 0x90
Device Size : 0
Description : Intel 28F400BX-TL or Intel 28F400BV-TL
------------------------------------------------------
Using passed in packet size, changing from 0x600 -> 0x600
EXTENDED_LINEAR_ADDRESS_REC @ 0x2a000000
Write 65536 bytes @ 0x2a000000
100EXTENDED_LINEAR_ADDRESS_REC @ 0x2a010000
Write 11840 bytes @ 0x2a010000
100START_LINEAR_ADDRESS_REC @ 0x2a000000
EOF_REC
Sleeping for 3s
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
Still no data, giving up!
sdl_hello() - Failed to receive ACK
sdl_hello() - Invalid response: 7e030003331b7e
sdl_hello() - This is a NAK response from ROM code, which means the device has b
een reset back to blank flash mode. Usually this is caused by power supply issue
s. Please try again with battery eliminator if it persists
RAMLOADER VERSION: PBL_DloadVER2.0
------------------------------------------------------
DEVICE INFORMATION:
------------------------------------------------------
Version : 0x8
Min Version : 0x1
Max Write Size: 0x600
Model : 0x90
Device Size : 0
Description : Intel 28F400BX-TL or Intel 28F400BV-TL
------------------------------------------------------
Using passed in packet size, changing from 0x600 -> 0x600
EXTENDED_LINEAR_ADDRESS_REC @ 0x2a000000
Write 65536 bytes @ 0x2a000000
100EXTENDED_LINEAR_ADDRESS_REC @ 0x2a010000
Write 11840 bytes @ 0x2a010000
100START_LINEAR_ADDRESS_REC @ 0x2a000000
EOF_REC
Sleeping for 3s
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
Still no data, giving up!
sdl_hello() - Failed to receive ACK
sdl_hello() - Invalid response: 7e030003331b7e
sdl_hello() - This is a NAK response from ROM code, which means the device has b
een reset back to blank flash mode. Usually this is caused by power supply issue
s. Please try again with battery eliminator if it persists
Unexpected target reset, bailing out after 2 retries
6.后来又用了4.4.4的就黑砖，依然无果。。
请问这个是怎么回事？ 跟我一样，放了2个月后来还是自己搞定了，近的话可以拿过来我帮你弄，qq2501200481 我也是，怎么弄好的
页:
[1]