xt1060 root后变砖 救黑砖问题
root按照http://bbs.ihei5.com/thread-347032-1-1.html的步骤操作的，每次root都是成功的，所有步骤都没问题，但是root后就是不开机啊，也无法进入fastboot没办法只有参照http://bbs.ihei5.com/thread-398875-1-1.html里的步骤按照救黑砖处理，Qhusb_dload驱动没问题，最后命令符提示如下，也是没法开机
C:\Users\Administrator\Desktop\moto x\1406381ermt3cktt4v142v\blankflash>qflash.e
xe -com4 -ramload MPRG8960.hex -mbn 33 MSM8960_bootloader_singleimage.bin -v -o
Motorola qflash Utility version 1.3
COMPORT :COM4
RAMLOADER :MPRG8960.hex
type is 0x21
7 mbn file name MSM8960_bootloader_singleimage.bin type 33
verbose mode on
Motorola qflash dll version 1.6
RAMLOADER VERSION: PBL_DloadVER2.0
------------------------------------------------------
DEVICE INFORMATION:
------------------------------------------------------
Version : 0x8
Min Version : 0x1
Max Write Size: 0x600
Model : 0x90
Device Size : 0
Description : Intel 28F400BX-TL or Intel 28F400BV-TL
------------------------------------------------------
Using passed in packet size, changing from 0x600 -> 0x600
EXTENDED_LINEAR_ADDRESS_REC @ 0x2a000000
Write 65536 bytes @ 0x2a000000
100EXTENDED_LINEAR_ADDRESS_REC @ 0x2a010000
Write 11840 bytes @ 0x2a010000
100START_LINEAR_ADDRESS_REC @ 0x2a000000
EOF_REC
Sleeping for 3s
sdl_hello() - Invalid response: 7e030003331b7e
sdl_hello() - This is a NAK response from ROM code, which means the device has b
een reset back to blank flash mode. Usually this is caused by power supply issue
s. Please try again with battery eliminator if it persists
RAMLOADER VERSION: PBL_DloadVER2.0
------------------------------------------------------
DEVICE INFORMATION:
------------------------------------------------------
Version : 0x8
Min Version : 0x1
Max Write Size: 0x600
Model : 0x90
Device Size : 0
Description : Intel 28F400BX-TL or Intel 28F400BV-TL
------------------------------------------------------
Using passed in packet size, changing from 0x600 -> 0x600
EXTENDED_LINEAR_ADDRESS_REC @ 0x2a000000
Write 65536 bytes @ 0x2a000000
100EXTENDED_LINEAR_ADDRESS_REC @ 0x2a010000
Write 11840 bytes @ 0x2a010000
100START_LINEAR_ADDRESS_REC @ 0x2a000000
EOF_REC
Sleeping for 3s
Write, GetLastError:31, hdlc_finalize_packet: failed to write buffer
sdl_hello() - Failed to send frame
Write, GetLastError:31, hdlc_finalize_packet: failed to write buffer
sdl_hello() - Failed to send frame
Write, GetLastError:31, hdlc_finalize_packet: failed to write buffer
sdl_hello() - Failed to send frame
sdl_hello() - Invalid response: 7e030003331b7e
sdl_hello() - This is a NAK response from ROM code, which means the device has b
een reset back to blank flash mode. Usually this is caused by power supply issue
s. Please try again with battery eliminator if it persists
RAMLOADER VERSION: PBL_DloadVER2.0
------------------------------------------------------
DEVICE INFORMATION:
------------------------------------------------------
Version : 0x8
Min Version : 0x1
Max Write Size: 0x600
Model : 0x90
Device Size : 0
Description : Intel 28F400BX-TL or Intel 28F400BV-TL
------------------------------------------------------
Using passed in packet size, changing from 0x600 -> 0x600
EXTENDED_LINEAR_ADDRESS_REC @ 0x2a000000
Write 65536 bytes @ 0x2a000000
100EXTENDED_LINEAR_ADDRESS_REC @ 0x2a010000
Write 11840 bytes @ 0x2a010000
100START_LINEAR_ADDRESS_REC @ 0x2a000000
EOF_REC
Sleeping for 3s
Write, GetLastError:31, hdlc_finalize_packet: failed to write buffer
sdl_hello() - Failed to send frame
sdl_hello() - Invalid response: 7e030003331b7e
sdl_hello() - This is a NAK response from ROM code, which means the device has b
een reset back to blank flash mode. Usually this is caused by power supply issue
s. Please try again with battery eliminator if it persists
Unexpected target reset, bailing out after 2 retries
C:\Users\Administrator\Desktop\moto x\1406381ermt3cktt4v142v\blankflash>
{:hug:}我遇到过，解决了 老子额安逸了 发表于 2016-3-22 18:31
我遇到过，解决了
怎么搞定的{:loveliness:}嘿嘿 laiod 发表于 2016-3-22 19:43
怎么搞定的嘿嘿
额，命令符里有提示啊，需要移除电池重新连接 老子额安逸了 发表于 2016-3-22 20:02
额，命令符里有提示啊，需要移除电池重新连接
拆机扣掉电池重新搞 刚我回家换了台电脑用救砖教程代码和教程一样了
但是依然还是黑屏啊进不去fastboot 难道是电池没电了？！
老子额安逸了 发表于 2016-3-22 20:02
额，命令符里有提示啊，需要移除电池重新连接
http://bbs.ihei5.com/forum.php?mod=viewthread&tid=400250&typeid=1087和这帖子遇到的情况一模一样啊
com都是com4 难道4不吉利邪门啊
额，我想知道你是不是用5.0的root方法用到4.4系统了{:sweat:}，或者说你刷之前GPT和BL等级不匹配啊，这样的话只有寄修我来搞了 老子额安逸了 发表于 2016-3-22 20:53
额，我想知道你是不是用5.0的root方法用到4.4系统了，或者说你刷之前GPT和BL等级不匹配啊，这样的 ...
那倒不是root之前系统是5.1官方底包没错bl对应也应该是对应的吧
laiod 发表于 2016-3-22 20:57
那倒不是root之前系统是5.1官方底包没错bl对应也应该是对应的吧
blankflash救砖写入成功不开机肯定是BL和GPT不匹配{:hug:}，底层你用的是最新的BE吧
老子额安逸了 发表于 2016-3-22 21:26
blankflash救砖写入成功不开机肯定是BL和GPT不匹配，底层你用的是最新的BE吧
这个还真不晓得 之前都没想过这个啊
页:
[1]
2