爱黑武论坛

 找回密码
 注册

QQ登录

只需一步,快速开始

查看: 3278|回复: 3

[救砖] v1060 升级5.1 root 黑砖!!!!!求教大神!!!

[复制链接]
发表于 2015-11-24 10:47 | 显示全部楼层 |阅读模式

立即注册,加入爱黑武论坛的大家庭!爱黑武,爱上搞机生活!

您需要 登录 才可以下载或查看,没有账号?注册

x
本帖最后由 junyujian 于 2015-11-24 12:36 编辑

大神我的流程:
1.v1060没解BL 4.4.4  不升级BL 升5.1,

2.进入系统后,按照http://bbs.ihei5.com/thread-347032-1-1.html 这个root无精简版,


3.忘记进入“禁用系统强制驱动签名”,但是驱动安装上了,开始root.bat。


4.黑砖一直黑,


5.按照http://bbs.ihei5.com/thread-303178-1-2.html 救砖显示如下
C:\Users\leo\Downloads\blankflash>qflash.exe -com3 -ramload MPRG8960.hex -mbn 33
MSM8960_bootloader_singleimage.bin -v -o
Motorola qflash Utility version 1.3
COMPORT      :COM3
RAMLOADER    :MPRG8960.hex
type is 0x21
7 mbn file name MSM8960_bootloader_singleimage.bin type 33
verbose mode on
Motorola qflash dll version 1.6
RAMLOADER VERSION: PBL_DloadVER2.0
------------------------------------------------------
DEVICE INFORMATION:
------------------------------------------------------
Version       : 0x8
Min Version   : 0x1
Max Write Size: 0x600
Model         : 0x90
Device Size   : 0
Description   : Intel 28F400BX-TL or Intel 28F400BV-TL
------------------------------------------------------
Using passed in packet size, changing from 0x600 -> 0x600
EXTENDED_LINEAR_ADDRESS_REC @ 0x2a000000

Write 65536 bytes @ 0x2a000000
100EXTENDED_LINEAR_ADDRESS_REC @ 0x2a010000

Write 11840 bytes @ 0x2a010000
100START_LINEAR_ADDRESS_REC @ 0x2a000000
EOF_REC
Sleeping for 3s
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
Still no data, giving up!
sdl_hello() - Failed to receive ACK
sdl_hello() - Invalid response: 7e030003331b7e
sdl_hello() - This is a NAK response from ROM code, which means the device has b
een reset back to blank flash mode. Usually this is caused by power supply issue
s. Please try again with battery eliminator if it persists
RAMLOADER VERSION: PBL_DloadVER2.0
------------------------------------------------------
DEVICE INFORMATION:
------------------------------------------------------
Version       : 0x8
Min Version   : 0x1
Max Write Size: 0x600
Model         : 0x90
Device Size   : 0
Description   : Intel 28F400BX-TL or Intel 28F400BV-TL
------------------------------------------------------
Using passed in packet size, changing from 0x600 -> 0x600
EXTENDED_LINEAR_ADDRESS_REC @ 0x2a000000

Write 65536 bytes @ 0x2a000000
100EXTENDED_LINEAR_ADDRESS_REC @ 0x2a010000

Write 11840 bytes @ 0x2a010000
100START_LINEAR_ADDRESS_REC @ 0x2a000000
EOF_REC
Sleeping for 3s
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
Still no data, giving up!
sdl_hello() - Failed to receive ACK
sdl_hello() - Invalid response: 7e030003331b7e
sdl_hello() - This is a NAK response from ROM code, which means the device has b
een reset back to blank flash mode. Usually this is caused by power supply issue
s. Please try again with battery eliminator if it persists
RAMLOADER VERSION: PBL_DloadVER2.0
------------------------------------------------------
DEVICE INFORMATION:
------------------------------------------------------
Version       : 0x8
Min Version   : 0x1
Max Write Size: 0x600
Model         : 0x90
Device Size   : 0
Description   : Intel 28F400BX-TL or Intel 28F400BV-TL
------------------------------------------------------
Using passed in packet size, changing from 0x600 -> 0x600
EXTENDED_LINEAR_ADDRESS_REC @ 0x2a000000

Write 65536 bytes @ 0x2a000000
100EXTENDED_LINEAR_ADDRESS_REC @ 0x2a010000

Write 11840 bytes @ 0x2a010000
100START_LINEAR_ADDRESS_REC @ 0x2a000000
EOF_REC
Sleeping for 3s
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
Still no data, giving up!
sdl_hello() - Failed to receive ACK
sdl_hello() - Invalid response: 7e030003331b7e
sdl_hello() - This is a NAK response from ROM code, which means the device has b
een reset back to blank flash mode. Usually this is caused by power supply issue
s. Please try again with battery eliminator if it persists
Unexpected target reset, bailing out after 2 retries



6.后来又用了4.4.4的就黑砖,依然无果。。


回复

使用道具 举报

 楼主| 发表于 2015-12-1 22:29 | 显示全部楼层
请问这个是怎么回事?
回复 支持 反对

使用道具 举报

发表于 2015-12-7 03:37 来自:爱黑武手机版 | 显示全部楼层
跟我一样,放了2个月后来还是自己搞定了,近的话可以拿过来我帮你弄,qq2501200481
回复 支持 反对

使用道具 举报

发表于 2018-8-16 19:07 | 显示全部楼层
我也是,怎么弄好的
回复 支持 反对

使用道具 举报

 Hello,黑武的好机友!回复想偷个懒?点这里: 
您需要登录后才可以回帖 登录 | 注册

本版积分规则

关闭

站长推荐上一条 /1 下一条

QQ|小黑屋|Archiver|手机版|爱黑武论坛 ( 京ICP备2023028323号 | 京公网安备11011202000270号 )

GMT+8, 2024-11-24 15:32 , Processed in 0.044725 second(s), 20 queries .

Powered by Discuz! X3.4

Copyright © 2001-2024, ihei5.com

快速回复 返回顶部 返回列表