冰的纯纯 发表于 2013-11-29 10:18

讨论一下XT890怎么更改默认存储

本帖最后由 到哪里倒要注册 于 2013-11-29 10:42 编辑

由于喜欢玩大型游戏,一个游戏就需要1G多,可用的内存就只有4.7G左右,这根本不够用,并且会有点小卡!!
因此在网上找了好多方法,见过最靠谱的就是修改system/etc下面的vold.fstab这个文件:
# Copyright (C) 2009 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# <A href="http://www.apache.org/licenses/LICENSE-2.0" target=_blank>http://www.apache.org/licenses/LICENSE-2.0</A>
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.


## Vold 2.0 fstab for the Morrestown Platform

#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################

# Mounts the first usable partition of the specified device
dev_mount sdcard /storage/sdcard1 auto /devices/pci0000:00/0000:00:04.0/mmc_host/mmc1 /devices/pci0000:00/0000:00:02.3/gadget/lun0


<P> </P>


这里面能修改的我都试过了,就是不起作用!!谁有更好的办法分享一下啊 !!!

LouisLaw 发表于 2013-11-29 10:41

嗯,貌似这个确实对后来的系统不起作用,2.3的时候好像可以

冰的纯纯 发表于 2013-11-29 18:49

LouisLaw 发表于 2013-11-29 10:41
嗯,貌似这个确实对后来的系统不起作用,2.3的时候好像可以

可是这手机也没偶2.3啊!!你看能不能找到解决办法呢??
页: [1]
查看完整版本: 讨论一下XT890怎么更改默认存储