精华 | |
金钱 | BA |
威望 | 点 |
贡献值 | 点 |
爱心 | 点 |
经验 | 点 |
注册时间 | 2012-11-23 |
最后登录 | 1970-1-1 |
在线时间 | 小时 |
| |
| |
| |
|
立即注册,加入爱黑武论坛的大家庭!爱黑武,爱上搞机生活!
您需要 登录 才可以下载或查看,没有账号?注册
x
本帖最后由 到哪里倒要注册 于 2013-11-29 10:42 编辑
由于喜欢玩大型游戏,一个游戏就需要1G多,可用的内存就只有4.7G左右,这根本不够用,并且会有点小卡!!
因此在网上找了好多方法,见过最靠谱的就是修改system/etc下面的vold.fstab这个文件:
- # Copyright (C) 2009 The Android Open Source Project
- #
- # Licensed under the Apache License, Version 2.0 (the "License");
- # you may not use this file except in compliance with the License.
- # You may obtain a copy of the License at
- #
- # <A href="http://www.apache.org/licenses/LICENSE-2.0" target=_blank>http://www.apache.org/licenses/LICENSE-2.0</A>
- #
- # Unless required by applicable law or agreed to in writing, software
- # distributed under the License is distributed on an "AS IS" BASIS,
- # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- # See the License for the specific language governing permissions and
- # limitations under the License.
- ## Vold 2.0 fstab for the Morrestown Platform
- #######################
- ## Regular device mount
- ##
- ## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
- ## label - Label for the volume
- ## mount_point - Where the volume will be mounted
- ## part - Partition # (1 based), or 'auto' for first usable partition.
- ## <sysfs_path> - List of sysfs paths to source devices
- ######################
- # Mounts the first usable partition of the specified device
- dev_mount sdcard /storage/sdcard1 auto /devices/pci0000:00/0000:00:04.0/mmc_host/mmc1 /devices/pci0000:00/0000:00:02.3/gadget/lun0
- <P> </P>
复制代码
这里面能修改的我都试过了,就是不起作用!!谁有更好的办法分享一下啊 !!!
|
|