跪求哪位大哥能共享一下国行system/etc下gps.conf文件

new2821

最好是百度云，感激不尽啊！

尘封之泪

1. #moto gps_xtra3.conf
   
2. 
   
3. #Uncommenting these urls would only enable
   
4. #the power up auto injection and force injection(test case).
   
5. XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra3grc.bin
   
6. XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra3grc.bin
   
7. XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra3grc.bin
   
8. 
   
9. # Error Estimate
   
10. # _SET = 1
    
11. # _CLEAR = 0
    
12. ERR_ESTIMATE=0
    
13. 
    
14. #Test
    
15. #NTP_SERVER=time.gpsonextra.net
    
16. #Asia
    
17. # NTP_SERVER=asia.pool.ntp.org
    
18. #Europe
    
19. # NTP_SERVER=europe.pool.ntp.org
    
20. #North America
    
21. NTP_SERVER=north-america.pool.ntp.org
    
22. 
    
23. # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
    
24. #               4 - Debug, 5 - Verbose
    
25. # If DEBUG_LEVEL is commented, Android's logging levels will be used
    
26. DEBUG_LEVEL = 2
    
27. 
    
28. # Intermediate position report, 1=enable, 0=disable
    
29. INTERMEDIATE_POS=0
    
30. 
    
31. # supl version 2.0
    
32. SUPL_VER=0x20000
    
33. 
    
34. # Emergency SUPL, 1=enable, 0=disable
    
35. SUPL_ES=0
    
36. 
    
37. # SUPL Mode (0=Standalone, 1=MSB, 2=MSA)
    
38. SUPL_MODE=0
    
39. 
    
40. # GPS Capabilities bit mask
    
41. # SCHEDULING = 0x01
    
42. # MSB = 0x02
    
43. # MSA = 0x04
    
44. # ON_DEMAND_TIME = 0x10
    
45. # GEOFENCE = 0x20
    
46. # default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
    
47. CAPABILITIES=0x37
    
48. 
    
49. # Accuracy threshold for intermediate positions
    
50. # less accurate positions are ignored, 0 for passing all positions
    
51. # ACCURACY_THRES=5000
    
52. 
    
53. ################################
    
54. ##### AGPS server settings #####
    
55. ################################
    
56. 
    
57. # FOR SUPL SUPPORT, set the following
    
58. SUPL_HOST=supl.google.com
    
59. SUPL_PORT=7276
    
60. 
    
61. # FOR C2K PDE SUPPORT, set the following
    
62. # C2K_HOST=c2k.pde.com or IP
    
63. # C2K_PORT=1234
    
64. 
    
65. ####################################
    
66. #  LTE Positioning Profile Settings
    
67. ####################################
    
68. # 0: Enable RRLP on LTE(Default)
    
69. # 1: Enable LPP_User_Plane on LTE
    
70. # 2: Enable LPP_Control_Plane
    
71. # 3: Enable both LPP_User_Plane and LPP_Control_Plane
    
72. LPP_PROFILE = 0
    
73. 
    
74. ################################
    
75. # EXTRA SETTINGS
    
76. ################################
    
77. # NMEA provider (1=Modem Processor, 0=Application Processor)
    
78. NMEA_PROVIDER=0
    
79. # Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
    
80. SGLTE_TARGET=0
    
81. 
    
82. ##################################################
    
83. # Select Positioning Protocol on A-GLONASS system
    
84. ##################################################
    
85. # 0x1: RRC CPlane
    
86. # 0x2: RRLP UPlane
    
87. # 0x4: LLP Uplane
    
88. A_GLONASS_POS_PROTOCOL_SELECT = 0
    

复制代码

尘封之泪

notepad++ 新建一个空文件。将这个复制进去。保存为gps.conf即可。

hanjiechao

尘封之泪 发表于 2015-4-30 21:36
notepad++ 新建一个空文件。将这个复制进去。保存为gps.conf即可。

能不能发一个moto360增加中文选项编译好的文件啊，看了你的帖子，实在搞不定{:soso_e101:}

新锐锋芒

拿去吧

司马浩成

hanjiechao 发表于 2015-4-30 21:45
能不能发一个moto360增加中文选项编译好的文件啊，看了你的帖子，实在搞不定

提供下 ClockworkSetup.apk和ClockworkSetup.odex 因为没有360，只能帮你试试

new2821

尘封之泪 发表于 2015-4-30 21:36
notepad++ 新建一个空文件。将这个复制进去。保存为gps.conf即可。

太复杂了啊~我刷了永泽的ROM现在不能搜星啊好郁闷，求方法，替换楼下的gps文件，开机显示系统更新也不能搜星~~~~

new2821

新锐锋芒 发表于 2015-4-30 21:52
拿去吧

我刷了永泽的ROM现在不能搜星啊好郁，替换了你的gps文件，开机显示系统更新还是不能搜星~~~~不知什么原...

dxr5886390

兄弟 你定位问题解决了吗

aveosemt

新锐锋芒 发表于 2015-4-30 21:52
拿去吧

感谢分享             。{:soso_e165:}