精华 | |
金钱 | BA |
威望 | 点 |
贡献值 | 点 |
爱心 | 点 |
经验 | 点 |
注册时间 | 2014-11-12 |
最后登录 | 1970-1-1 |
在线时间 | 小时 |
| |
| |
| |
|
You:
做好以下准备
- shouldn't be afraid of Qualcomm HS-USB QDLoader 9008;不怕Qualcomm HS-USB QDLoader 9008
- do not change any files, pathes;
不要更改任何文件和路径
- can install drivers manually;
会手动安装驱动
- need to install python-2.7.9 and pyserial-2.7.win32;
需要安装python-2.7.9 and pyserial-2.7.win32
- unzipp ROM_C_Python27.rar to C:\Python27;
把ROM_C_Python27.rar 解压到 C:\Python27
Method is dangerous, however gives results.
00 You have ROM SU6-7 (SU4-21 contains specific certificate and can be unlocked with SunShine).--确定你的rom是SU6-7版本
01 Unzipp everything to C:\Python27.
--把ROM_C_Python27.rar 解压到 C:\Python27
02 Run BLBROKE.bat.
--运行 BLBROKE.bat
03 After you got Qualcomm HS-USB QDLoader 9008,
install drivers manually
-- 进入Qualcomm HS-USB QDLoader 9008,安装驱动
04 Run RUN_SYS1.bat. Parts 1-30 of system.
-- 运行RUN_SYS1.bat
05 Device will try to boot. Charge it in fastboot for 10-15 mins.
-- 设备会尝试启动,在fastboot模式下充电10-15分钟
06 Run BLBROKE.bat
--运行 BLBROKE.bat
07 Run RUN_SYS2.bat. Parts 31-60 of system.
-- 运行 RUN_SYS2.bat
08 Device will try to boot. Charge it in fastboot for 10-15 mins.
--- 设备会尝试启动,在fastboot模式下充电10-15分钟
09 Run BLBROKE.bat
--运行 BLBROKE.bat
10 Run RUN_SYS3.bat. Parts 61-90 of system.
-- 运行 RUN_SYS3.bat
11 Device will try to boot. Charge it in fastboot for 10-15 mins.
-- 设备会尝试启动,在fastboot模式下充电10-15分钟
12 Run BLBROKE.bat
--运行 BLBROKE.bat
13 Run RUN_SYS4.bat. Parts 91-120 of system
-- 运行 RUN_SYS4.bat
11 Device will try to boot. Charge it in fastboot for 10-15 mins.
-- 设备会尝试启动,在fastboot模式下充电10-15分钟
12 Run BLBROKE.bat
--运行 BLBROKE.bat
13 Run RUN_SYS5.bat. Parts 121-132 of system
-- 运行 RUN_SYS5.bat
14 Device will try to boot. Charge it in fastboot for 10-15 mins.
-- 设备会尝试启动,在fastboot模式下充电10-15分钟
15 Turn device on. Now you have SU5.24_(Blur 23.3.24)_Deodex
--开机,你的rom现在是 SU5.24_(Blur 23.3.24)_Deodex
Drivers, scripts, ROM are here -> https ://yadi.sk/d/GQv5qjPIf5MUY
|
|