精华 | |
金钱 | BA |
威望 | 点 |
贡献值 | 点 |
爱心 | 点 |
经验 | 点 |
注册时间 | 2014-3-30 |
最后登录 | 1970-1-1 |
在线时间 | 小时 |
| |
| |
| |
|
楼主 |
发表于 2015-12-11 23:20
|
显示全部楼层
Microsoft Windows [版本 6.1.7601]
版权所有 (c) 2009 Microsoft Corporation。保留所有权利。
D:\迅雷下载\blankflash>qflash.exe -com3 -ramload MPRG8960.hex -mbn 33 MSM8960_bo
otloader_singleimage.bin -v -o
Motorola qflash Utility version 1.3
COMPORT :COM3
RAMLOADER :MPRG8960.hex
type is 0x21
7 mbn file name MSM8960_bootloader_singleimage.bin type 33
verbose mode on
Motorola qflash dll version 1.6
RAMLOADER VERSION: PBL_DloadVER2.0
------------------------------------------------------
DEVICE INFORMATION:
------------------------------------------------------
Version : 0x8
Min Version : 0x1
Max Write Size: 0x600
Model : 0x90
Device Size : 0
Description : Intel 28F400BX-TL or Intel 28F400BV-TL
------------------------------------------------------
Using passed in packet size, changing from 0x600 -> 0x600
EXTENDED_LINEAR_ADDRESS_REC @ 0x2a000000
Write 65536 bytes @ 0x2a000000
100EXTENDED_LINEAR_ADDRESS_REC @ 0x2a010000
Write 11840 bytes @ 0x2a010000
100START_LINEAR_ADDRESS_REC @ 0x2a000000
EOF_REC
Sleeping for 3s
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
Still no data, giving up!
sdl_hello() - Failed to receive ACK
sdl_hello() - Invalid response: 7e030003331b7e
sdl_hello() - This is a NAK response from ROM code, which means the device has b
een reset back to blank flash mode. Usually this is caused by power supply issue
s. Please try again with battery eliminator if it persists
RAMLOADER VERSION: PBL_DloadVER2.0
------------------------------------------------------
DEVICE INFORMATION:
------------------------------------------------------
Version : 0x8
Min Version : 0x1
Max Write Size: 0x600
Model : 0x90
Device Size : 0
Description : Intel 28F400BX-TL or Intel 28F400BV-TL
------------------------------------------------------
Using passed in packet size, changing from 0x600 -> 0x600
EXTENDED_LINEAR_ADDRESS_REC @ 0x2a000000
Write 65536 bytes @ 0x2a000000
100EXTENDED_LINEAR_ADDRESS_REC @ 0x2a010000
Write 11840 bytes @ 0x2a010000
100START_LINEAR_ADDRESS_REC @ 0x2a000000
EOF_REC
Sleeping for 3s
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
Still no data, giving up!
sdl_hello() - Failed to receive ACK
sdl_hello() - Invalid response: 7e030003331b7e
sdl_hello() - This is a NAK response from ROM code, which means the device has b
een reset back to blank flash mode. Usually this is caused by power supply issue
s. Please try again with battery eliminator if it persists
RAMLOADER VERSION: PBL_DloadVER2.0
------------------------------------------------------
DEVICE INFORMATION:
------------------------------------------------------
Version : 0x8
Min Version : 0x1
Max Write Size: 0x600
Model : 0x90
Device Size : 0
Description : Intel 28F400BX-TL or Intel 28F400BV-TL
------------------------------------------------------
Using passed in packet size, changing from 0x600 -> 0x600
EXTENDED_LINEAR_ADDRESS_REC @ 0x2a000000
Write 65536 bytes @ 0x2a000000
100EXTENDED_LINEAR_ADDRESS_REC @ 0x2a010000
Write 11840 bytes @ 0x2a010000
100START_LINEAR_ADDRESS_REC @ 0x2a000000
EOF_REC
Sleeping for 3s
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
Still no data, giving up!
sdl_hello() - Failed to receive ACK
sdl_hello() - Invalid response: 7e030003331b7e
sdl_hello() - This is a NAK response from ROM code, which means the device has b
een reset back to blank flash mode. Usually this is caused by power supply issue
s. Please try again with battery eliminator if it persists
Unexpected target reset, bailing out after 2 retries
D:\迅雷下载\blankflash> |
|