精华 | |
金钱 | BA |
威望 | 点 |
贡献值 | 点 |
爱心 | 点 |
经验 | 点 |
注册时间 | 2013-12-30 |
最后登录 | 1970-1-1 |
在线时间 | 小时 |
| |
| |
| |
|
立即注册,加入爱黑武论坛的大家庭!爱黑武,爱上搞机生活!
您需要 登录 才可以下载或查看,没有账号?注册
x
------------------------------------------------------
DEVICE INFORMATION:
------------------------------------------------------
Version : 0x8
Min Version : 0x1
Max Write Size: 0x600
Model : 0x90
Device Size : 0
Description : Intel 28F400BX-TL or Intel 28F400BV-TL
------------------------------------------------------
Using passed in packet size, changing from 0x600 -> 0x600
EXTENDED_LINEAR_ADDRESS_REC @ 0x2a000000
Write 65536 bytes @ 0x2a000000
100EXTENDED_LINEAR_ADDRESS_REC @ 0x2a010000
Write 11840 bytes @ 0x2a010000
100START_LINEAR_ADDRESS_REC @ 0x2a000000
EOF_REC
Sleeping for 3s
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
Still no data, giving up!
sdl_hello() - Failed to receive ACK
sdl_hello() - Invalid response: 7e030003331b7e
sdl_hello() - This is a NAK response from ROM code, which means the device has b
een reset back to blank flash mode. Usually this is caused by power supply issue
s. Please try again with battery eliminator if it persists
RAMLOADER VERSION: PBL_DloadVER2.0
------------------------------------------------------
DEVICE INFORMATION:
------------------------------------------------------
Version : 0x8
Min Version : 0x1
Max Write Size: 0x600
Model : 0x90
Device Size : 0
Description : Intel 28F400BX-TL or Intel 28F400BV-TL
------------------------------------------------------
Using passed in packet size, changing from 0x600 -> 0x600
EXTENDED_LINEAR_ADDRESS_REC @ 0x2a000000
Write 65536 bytes @ 0x2a000000
100EXTENDED_LINEAR_ADDRESS_REC @ 0x2a010000
Write 11840 bytes @ 0x2a010000
100START_LINEAR_ADDRESS_REC @ 0x2a000000
EOF_REC
Sleeping for 3s
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
No data read from USB. This may not be an error. Trying again...
Still no data, giving up!
sdl_hello() - Failed to receive ACK
sdl_hello() - Invalid response: 7e030003331b7e
sdl_hello() - This is a NAK response from ROM code, which means the device has b
een reset back to blank flash mode. Usually this is caused by power supply issue
s. Please try again with battery eliminator if it persists
Unexpected target reset, bailing out after 2 retries
C:\Users\Administrator\Desktop\moto x\求砖>pause
请按任意键继续. . .
驱动是有的,就是老是这样,用5.1那个root的就弄成砖了,不知道哪里出了问题,V版的不能解BL的机子。我也好久没来这论坛了,求救,谢谢
|
|